hp deskjet 3752 troubleshooting 2019-06-18T10:59:43+00:00

HP Deskjet 3752 Troubleshooting

If the printer detects any HP Deskjet 3752 error state message, it indicates that there is some HP Deskjet 3752 troubleshooting issue with the hardware or software or network connection. Once you know how to troubleshoot the printer issues of your MFP, you can improve the speed, quality, and cost-effectiveness of your printing and the quality of your scans. You can also refer the manual that had been shipped with the printer to clarify any doubts. Given below are few common issues printer users may face and ways to fix them and improve your printer’s performance.

HP Deskjet 3752 how to fix a paper jam

  • Discard all loose and jammed paper from the input tray area.
  • To check for any jammed paper or objects, use a flashlight.
  • Discard any loose or jammed paper accessible from the output tray.
  • Take out any loose or jammed paper from the ink cartridge access area.
  • Ensure that the carriage moves freely and then load plain paper.
  • Make sure that the ink cartridges are correctly installed.
  • Improper placement or installation may cause a carriage jam error.
  • Take out and reinstall the ink cartridges and try to print again.
  • Switch on the printer and open the ink cartridge access door.
  • Now, carefully hold the ink cartridge by its sides.
  • Reinsert the ink cartridge into its slot and gently push it.
  • Repeat the preceding steps for the other ink cartridge.
  • Close the ink cartridge access door and try to print.
  • Connect the printer directly to an electrical outlet.
  • Now, print. If the HP Deskjet 3752 Troubleshooting error persists, proceed to the next step.
  • Make sure that you reset the HP Deskjet 3752 printer to clear the error.
  • Sometimes, an error message may display even after the issue is resolved.
  • Now, turn on the printer, if it is not already on.
  • Reconnect the power cord and then try to print.
  • If the HP Deskjet 3752 error state is unresolved, service the printer.

HP Deskjet 3752 Prints a Blank Page

  • Take out the black cartridge and print with the tri-color cartridge.
  • This allows creating composite black from the tri-color cartridge.
  • Tap the Power button to turn on the printer, if it is not already on.
  • Raise the lid and gently push it back until it stops.
  • Now, set the black cartridge aside, with the nozzles facing up.
  • Check estimated ink levels and replace any low or empty cartridges.
  • You can use an automated tool to clean the printhead.
  • Mount letter or A4, unused, plain white paper in the paper tray.
  • Try to print. If the HP Deskjet 3752 troubleshooting issue persists, proceed to the next step.
  • Examine the text and color blocks on the test page.
  • The defects with the black text indicate the problem with the black cartridge.
  • The defects with the color text indicate the problem with the color cartridge.
  • Press the Power button to switch on the 123 HP Deskjet 3752 printer.
  • Now, you need to open the cartridge access door.
  • You will notice that the carriage moves to the cartridge access area.
  • Release the cartridge by lifting the lid on the cartridge slot.
  • Now, carefully push the lid back until it stops.
  • Remove the new ink cartridge from its package.
  • To secure the cartridge into place, carefully shut the lid.
  • If the issue is unresolved, service the printer.

HP Deskjet 3752 won’t print or scan

Step 1 : To run Print and Scan Doctor

  • Download and run HP Print and Scan Doctor to resolve printer issues.
  • Now, tap the Start option on the Welcome screen.
  • Make sure that the printer is turned on and connected.
  • Select your printer and tap either Fix Printing or Fix Scanning to resolve HP Deskjet 3752 not printing.

Step 2 : To fix HP Deskjet 3752 won’t print problems

  • To test the status of the 123 HP Deskjet 3752 printer, you can use the HP Print and Scan Doctor.
  • To open the tool, double-click the HP Print and Scan Doctor icon.
  • Now, click the Start option on the Welcome screen.
  • Select your printer model, then tap Next and tap Fix Printing for HP Deskjet 3752 not printing.

Step 3 : To fix scanning problems

  • To test the status of the printer, use the HP Print and Scan Doctor.
  • To open the tool, you need to double-click the HP Print and Scan Doctor icon.
  • Now, select the Start option on the Welcome screen.
  • Choose your printer model, then tap Next and tap Fix Scanning.

Step 4 : To evaluate the results

  • If you notice white checkmarks, the printer passed the tests.
  • If you notice a white wrench, it indicates a repaired issue.
  • If you notice yellow exclamation points, the test failed.
  • If you notice a red X, follow the on-screen prompts to resolve the HP Deskjet 3752 troubleshooting issue.

HP Deskjet 3752 Ink cartridge issues

  • Check the cartridge compatibility by following the prompts on the screen.
  • Go through the steps below if the cartridge is compatible.
  • In case the ink cartridge is not compatible, replace it immediately.
  • Ensure that the ink cartridges are inserted correctly.
  • Switch on the printer and proceed to the next step.
  • Take out and check the ink cartridge for any damage.
  • You can reinsert the ink cartridge into its corresponding slot.
  • Now, ensure that the carriage latch is down.
  • Carefully shut the ink cartridge access door to secure the cartridge.
  • If the HP Deskjet 3752 Troubleshooting issue is unresolved, move on to the next step.
  • Take out each ink cartridge and wipe the contacts.
  • Switch on the printer and wait for the carriage to halt.
  • Now, carefully clean the ink cartridge contacts again.
  • Insert the ink cartridge into their corresponding slots.
  • To secure the cartridge, shut the ink cartridge access door.
  • If the HP Deskjet 3752 Troubleshooting issue is unresolved, move on to the next step.
  • Reboot the printer as it may help to resolve the issue.
  • After sometime reconnect the power cable and proceed to the next step.
  • Now, try printing a test page to examine the quality of the print.
  • If the HP Deskjet 3752 won’t print issue still persists, replace the ink cartridge.

HP Deskjet 3752 Copy issues

Step 1 : Wiping the scanner glass

  • You can primarily try cleaning the scanner glass and scanner lid.
  • The document feed slot may also have smudges, debris or dust.
  • Raise the ADF and then wipe the ADF rollers and separator pad.
  • If the HP Deskjet 3752 troubleshooting issue still persists, proceed to the next step.

Step 2 : Reloading the document

  • You can remove the original document from the ADF.
  • Switch off the 123 HP Deskjet 3752 printer and after cleaning, proceed to the next step.
  • Reload the original document print side up in the document feeder tray.
  • You need to carefully place the document into the printer.

Step 3 : Changing the copy settings

  • Switch on the printer and then try to copy.
  • Tap the Copy button or icon on the printer’s control panel.
  • Make sure that the paper size and type are correct.
  • Choose the Setup or Settings button and then tap Paper Setup.

Step 4 : Rebooting the printer

  • Rebooting the printer may help to resolve any copy issue.
  • Mount the original document or photo and then try to copy.
  • You can replace the 123 HP Deskjet 3752 printer if the issue is unresolved.
  • For any solutions, contact us on the tech number.
HP Deskjet 3752 Error State

Step 1 : To use genuine HP ink cartridges

  • Make sure that you use genuine HP ink cartridges.
  • If necessary, you can choose your country/region.
  • In few cases, a printer reset can clear the HP Deskjet 3752 error state message.
  • If the issue persists, proceed to the next step.

Step 2 : To check estimated ink levels

  • You can check your control panel for the Estimated Ink Levels.
  • Note that the control panel options vary by 123 HP Deskjet 3752 printer model.
  • You need to select your computer operating system.
  • When an indicator shows low-ink levels, replace the ink cartridge.

Step 3 : To clean the ink cartridge vents and contacts

  • Use a clean, lint-free cloth to wipe any accumulated ink and debris.
  • If the print quality is unacceptable, use the automatic printhead cleaning utility.
  • You can also clean the printhead with an automated tool.
  • Manually clean the printhead with a clean, lint-free cloth.

Step 4 : To replace the printhead

  • Install a new printhead assembly when the printhead assembly is damaged.
  • Wait until you have a new printhead assembly before removing the cartridges.
  • Check if your printhead assembly is under warranty.
  • If the HP Deskjet 3752 troubleshooting issue persists after replacing the printhead, service the printer.
HP Deskjet 3752 Network and connection issues

Step 1 : Rebooting the HP Deskjet 3752 printer and router

  • Reboot your printer and wireless router to resolve any connectivity HP Deskjet 3752 troubleshooting issues.
  • After a while, turn on the printer and try to print.
  • On your Windows PC, run the HP Print and Scan doctor.
  • If you have a basic control panel, check the light status.

Step 2 : Connecting the printer to the network

  • Use the WPS to automatically connect the printer to the router.
  • Place the printer and PC closer to the router.
  • You can print a Wireless Network Test report from the control panel.
  • Make sure that you check the status of the printer.

Step 3 : Minimizing wireless channel interference

  • Print a Network Configuration Page and locate the network channel.
  • Obtain your wireless router IP address and change the network channel.
  • Change the wireless network name to resolve connectivity issues.
  • If the issue persists, proceed to other solutions.

Step 4 : Trying other solutions

  • Check for and turn off any additional routers.
  • Place the router and closer but not less than 1.8m
  • Print a Network Configuration Report to evaluate the IP address.
  • Update the printer firmware and then assign a manual IP address using the manual of HP Deskjet 3752 Troubleshooting.
shares
123.hp.com support

For Printer Solution